Cuprinol 5159077 Garden Shades - White Daisy (2.5L)

Product Information

Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Don't try to coat the whole project with one coat before getting onto the next coat. Instead it is better to paint sections in in time chunks of 2-4 hours. Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property.

Decided to change the colour from Seagrass. Put the first coat on and the old surface seems to be repelling the new paint and gives it a dappled appearance. Any suggestions since a light sanding to provide a key doesn't appear to work. Touch dry in one hour under normal weather conditions. Where a second coat is required, allow up to eight hours in between coats By working with a variety of trusted Range Plus Partners, we’re able to offer our customers a wider selection of products. Ensure that wooden surfaces to be treated are clean, dry and free from surface dirt and debris before painting. It is important that any wood preservative used does not contain wax, oil or silicon as these will penetrate the wood and repel any water-based product that is applied on top. Bare or New Timber We'd recommend brushing over the surface with a stiff bristle brush to break down the waxes following a clean down to remove any residue. Once the waxes are broken down and removed a new coat can be applied.Brighten up your garden with Cuprinol Garden Shades Paint. With a wide selection of colours available you will be able to easily redecorate your garden to your liking. It sounds as though the protective layer of the previously applied Garden Shades is stopping the new coat from adhering. Sofas & Sofa Beds Chairs & Footstools Tables Storage & Home Throws Rugs Dining Chairs Dining Table Sets Cooking & Dining If you're still having trouble after the above, please get in touch with our team at [email protected] with the reference number 2443507 so we can take a further look for you! Coverage on smooth wood using a brush is 10-12m2 per litre, coverage on rough sawn wood using a brush is 3-5m2 per litre

Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. I bought 2 tins of white daisy, garden shades for my summer house. After applying it , when it started raining a day later it’s started going yellow. Not fit for purpose. I also used 2 tins of fresh rosemary which was fine. Must be a bad batch. There can’t be any quality control at Cuprinol. Insufficient or non-existent use of a fungicidal wash to clean the surface may have allowed mold or green growth particles to form beneath the coating