Rust-Oleum 400ml Chalky Finish Furniture Spray Paint - Chalk White

Product Information

Surface Preparation - For best results, ensure the surface is clean, dry and free from loose paint, mould and mildew, wax or oil. If wax has been used clean the surface thoroughly with a suitable wax remover. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be abraded before painting. Cover surrounding areas to protect from spray mist.

Application: Stir thoroughly before use. The product may be appliedby brush or roller. If applying by brush, apply evenly, following the grain Coverage: Up to 14m2 / litre. Coverage may vary depending uponmethod and rate of application and porosity of surface.Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for the disposal of waste coatings. Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Some food items may stainthe product, remove any spills immediately to stop this or minimize theeffect. Not suitable for use on a bath or any surface regularly immersedin water. Temperature at time of application and during drying should begreater than 10°C. Available in an extensive range of 100+ colours, brighten your interior walls with vibrant brights, playful pastels or soothing neutrals

Drying Time: Touch dry in 1 hour. Hard dry in 4 hours. May be overcoated after 4 hours. Full cure achieved after 7 days - take extra care Drying Time: Touch dry in 2 hours. Apply a second coat after 2 hoursif necessary. Hard dry in 4 hours, full hardness achieved after 7 days.

Similar products

Limitations: For interior use only. Temperature at time of theapplication and during drying should be greater than 5°C. To ensurepaint suitability for your particular project test on a small inconspicuousarea first. Application: Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a nap mohair roller. To create a distressed look apply two coats in contrasting colours. Allow to dry then lightly abrade with moistened sand paper or a stainless steel scouring pad - abrade with the grain of the wood. Protect the effect with Rust-Oleum Furniture Finishing Wax.