Joined in 2023 
82 
63 About this deal
When performing a firmware update, it is critical that the update is not interrupted. While updating, please ensure the following: This will switch between mic gain, headphone volume, and the monitoring mix. This lets you decide on the balance between how much of the mic you can hear. And, that also goes for how much you hear every other sound that’s sent to the headphones. It has a learning curve, however, once you figure out how it works, it’s pretty easy to use and integrate into OBS, XSplit, and other streaming software. Our Voicemeeter setup guide for splitting audio in OBS can help you out! The Bottom Line The console also features a 16-bit DSP for special effects and a USB slot for connecting flash drives, laptops, PCs, or phones.
The L5 is compatible with PC, PS4, iOS, and Android. The console is portable and includes a 2,000 mAh rechargeable battery that can last for up to 10 hours (without phantom power), allowing streamers to broadcast from anywhere. It doesn’t have a complicated interface with multiple dials and faders; it instead has one dial and some buttons for controlling audio volume, mic volume, and crossfade between the two. When we were inspecting the product for our Elgato Wave XLR review, we could dismiss it as a bit basic. This was the first time we saw it, and also when we compared it to other smaller XLR interfaces around. The Elgato Wave Link software is the utility suite made for configuring Elgato products like the Wave XLR. It debuted last year when the company release the Wave:3 USB microphone. In addition to the XLR input and USB-C connection, the rear also features a 3.5mm headphone connection, allowing you to plug directly into the Wave XLR and monitor your audio output with zero-latency. The USB connection will also route your computer audio through the Wave XLR, allowing you to monitor your entire mix, which you can easily balance using the large knob on the front of the device. The knob turns infinitely, using the surrounding LEDs to communicate the levels of each of the three main settings it controls: mic input gain, output volume to the headphones, and to dial in the crossfade mix between your mic and your PC audio. The knob simply pushes in to switch between the settings. You can also toggle the 48V phantom power on and off depending on if your particular XLR mic needs it or not. While the mic we used was a condenser mic, Elgato also says that Wave XLR can breathe life into dynamic microphones via “75 dB of ultra low-noise gain.”The Mix5 is a 5-channel mixer that includes one mic preamplifier outfitted with a 2-band equalizer. The unit comes with presets for speech and vocal effects that can be easily turned on/off by a button. Streamers can change mic-input sounds using five different voice effects. The device comes with software that can be used to assign audio files to the sound pads. It is compatible with both headset mics and 4-pole earphones with mics designed for smartphones. The Elgato Wave XLR is an affordable high-end solution for your streams and podcasts. Its simple design, user-friendly software, and excellent performance make this product a must-have for content creators. It offers you the freedom to utilise any XLR microphone with your computer.
The Wave XLR has a maximum input and output level of 10V @ 0dB gain and 77 mW respectively. Resolution is 24-bit then its sample rate is 48 / 96kHz. The product has an equivalent input noise of -130dBV @ 60dB gain. Speaking of its gain, it ranges from 0 to 75dB while phantom power is at 48 VDC 7mA.
6. GoXLR Mini (most similar to the GoXLR Pro)
It comes with six live-streaming modes: chat, autotune, warcraft, MC, sing, and Lolita. It also has 10 preset audio effects like laughter, heartbeat, danger, clap, and more. It is compatible with smartphones, tablets, Macs, and PCs—no special driver installation necessary.
Great Deal 
New Comment