God Hand PN-120 single-edged nippers

Product Information

Oh, and did I mention these are almost half the price of the GodHand models, about half over again on the Citadel Fien Detail cutters. This is a precision nipper with a delicate blade. If used improperly, the blade may chip or break. Please follow the guideline below when using this nipper. Please do not twist the blade during cutting or releasing from the runner. Twisting may cause it to break under load. Please do not cut plastics that are too long for the blade. The load will be applied to one point, causing it to break or bend.

Please do not use for cutting plastics that exceed the cutting capacity or materials that are not compatible (metal, resin, paper, and other materials besides plastic). There are two main types of cutter on this list Flat Edge and Dual Cut. On flat-edge cutters, one side of the cutters is flat. instead of cutting the plastic this edge acts as a stop allowing the other side to cut from only 1 direction. dia-cut is where both sides have a cutting edge and cut the plastic to meet in the middle. In my experience, wither of these really offer a better cut as both leave a bit of residue on the model. However, the flat-edge cutters do seem to last longer as you aren’t having 2 blades cut into each other.

Popular

The image above shows just how little stress is put on the plastic as these things carve through sprues like butter. Grab your current set oof cutters and try this yourself. see how much of the sprue is stressed (it will turn white). Notice how one side will be left in the shape of a V as the cutters have mangled it. and notice on the other edge as you can still see a pinch of plastic where the cutters weren’t flush. Because you are still going to need to deal with that on your models before you apply primer & paint. Searching Reddit’s r/gunpla/ community the other day, I saw a post titled “ What’s the single best nipper after God Hand?” To this poster, the fact that the God Hand Ultimate Nipper is undeniably number one on the nipper ranking isn’t up for debate. It is created one by one through blade edging and sharpening by well-experienced craftspersons in Tsubame-Sanjo, Niigata Prefecture, a region famous for its cutlery. God-hand a cut above the rest (no I won’t apologise for that). if you just wanted to know which are the best cutters, these are them. We're not just making that up - Pete, James and Foxx have sworn by them for years and we are ridiculously excited to be able to bring them to you now. They truly are tools that are at home whether they are in the hands of a beginner or a professional. These are not mass-produced throwaway tools; they are tools designed by and for master craftsmen that will enable you to create incredible art.Ultimate Ultra-Thin Single-Edge! Ultimate Sharpness!

When trying to slice-cut a 3 mm dia. runner, the blade moves in smoothly and finishes cutting without sound. This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. The cutting blade is created by the craftsmen of "Tsubamesanjo" in Niigata prefecture, famous for cutting toolsWhen cutting out small parts, parts are less likely to fly away, reducing the need to search for missing parts. Never cut pieces that exceed the cutting capacity above or non-plastic materials (metal, resin, paper, etc ...) GODHAND Nippers are high-quality carbon steel nippers made especially for cutting plastics and resins. It is a fantastic tool that is simple to use and trusted by both experienced and novice modelers. They are specialty nippers renowned for their sharpness that are perfect for precise cutting, so you can obtain a smooth surface with a minimum of scraping, sanding, and polishing.

The sharpness of the cutting edge achieves a smooth cut surface as if sharpened with a design knife and minimizes plastic whitening (a phenomenon in which the cut section turns white). The wide cutting board edge supports an object firmly leading to minimum deformaties due to cutting. It’s a trade-off that I think is well worth it because they make the build process so much faster, easier and cleaner. When the cutting edge and the cutting board edge are not aligned, it will result in an unclean cut and possible chipping and breaking of the blades. These are dual cutters with blades on each side, they provide an incredibly smooth cut and whilst not made for miniatures the precision head is perfect for getting into tight places.DSPIAE have now released the 3.0 version of these, but I have seen little difference between them and the 2.0, so if you can get the 2.0 still, grab them. they are just as good. The GODHAND PN120 Nipper is a single-edged nipper from the GODHAND Nipper Collection. Like the others from the collection, it upholds the quality sharpness provided by GODHAND’s products, providing a neat and precise cut. It features a soft-grip handle and comes with the original nipper cap included. I cannot comment much on the set, because I haven’t used the nippers from it and it would be inappropriate if I label it in this list. However, people that used this swear by it. On the other side they are fans of MENG Models and that might be slightly misleading. The truth is, that the set is very affordable and probably comparable with Trumpeter’s nippers mentioned above. MENG are releasing airbrushes, thin glues and what not nowadays, so one can tell they are aiming high. Probably they won’t embarrass themselves with lousy product, so I am inclined to trust this set. Nippers seems precise enough and with that price, it won’t hurt to give them a chance. Conclusion: