VLAND LED Rear lights For 2008-2013 Golf 6 MK6 GTI GTD R TSI Tail Light With Sequential,Red and White,RHD(Driver is on the Right)

Product Information

Once you can see everything, unhook any and all electrical connectors from the back of the headlight assembly. User maunal*1, One pair of taillight (include left side and right side) This item has the same connections and wires with the original headlights. The additional charge for customs clearance is down to the recipients responsibility and we have no control over these charges. Let's ditch the old, and modernise the look of your MK6 Golf with a full MK6R LED tail light conversion! In the event your vehicle manufacturer has used rivets to secure things (wheel well areas), they’ll need to be drilled out with a traditional drill.

They specify a specific build date for these cables to work which I'm not sure matches your car but it just shows that there is stuff like this out there. First, vents along the top and bottom of the headlight housing are necessary to equalize pressure differences that would otherwise cause the entire assembly to crack and fail. Depending on your year and model car, plus the design of the new custom lights, you may need to transfer some bulbs. If no cracks or holes are visible around the edges of the headlight, the problem could be the housing itself.The hardest part was getting the wire through the conduit but I just removed the plug and joined the wires with some electrical tape. The related products of golf mk6 led tail lights: High quality leds for less consumption and more light. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . com Limited is an Introducer Appointed Representative of CarMoney Limited who are authorised and regulated by the Financial Conduct Authority, FRN 674094.

Some Parking lights come with two (running lights, ground) or three (running lights, turn signal, ground) wires. High quality led head light makes the night brighter and has a durable service life, which is especially suitable for golf led tail lights. Byte 18, is the only thing that can be messed up, but since you already have the original coding, you are fine to experiment as you wish. There may also be small plastic caps or clips covering such bolts, so remove them with a small flathead screwdriver.If you have purchased lamps without any additional lighting elements like halos or LED lights, you are done with the electrical installation.