ATTEN Professional ST-862D Hot Air Station

Product Information

What's important is if airflow rating is real and if it can actually quickly gain and keep set temperature at maximum airlow. If your parcel seems like it's going to be delayed, please get in touch with us, we are always here to help. ST-1020D is an intelligent desktop DC ion fan that blows ionized air over the surface of electro-static sensitive products. Very low airflow which is also highly pulsating, so it can blow off small components even at low airflow.

Other similar stations like Best or Atten are knockoffs of it, some more blatant than others, Atten ST-862D being one of the least obvious. Comes with a nice stand and four different nozzles for different sized parts, three of which are angled to make it easier to hold the wand while heating up a zone. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.

As we all know there is a small chance your parcel can arrive late due to uncontrollable circumstances such as bad weather, traffic, temporary technical issues, etc. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.

Comes with four nozzles, use the smallest size you can get away with - it helps avoid damaging other components if you are trying to isolate one part of the board while avoiding a connector, for example.

In addition, the system has an overheat protection system as well as a good cooling system, which ensures long operating times in harsh environments. The Atten ST-862D is a professional digital hot air station featuring a high power output and LCD screen. Blower fan can be noisy, however way more silent at 20 l/min airflow which is a typical maximum for diaphragm pumps. Using vacuum principle for picking up small electronic components, such as IC, SMD and other parts, up to about 50g.

This powerful station has an internal pump and heater to blow a steady stream of temperature-controlled hot air to make it super easy to remove components, fix joints and jumpers, replace missing components, or just correct something you've done wrong. This is already (supposedly) a copy of a copy, can there be even further copies/bootlegs of this exact model since it has become popular? In addition to the hot air function, the device can also generate an air flow at room temperature to cool components.It has a closed-loop temperature control range between 100℃-480℃ (212℉-896℉) and a digital display so you can easily tell what temperature the air's blowing at. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. It's also possible to use solder paste (in a syringe for example) to apply paste and then blow hot air over it to melt the solder and get the components into place. It can add critical time to a project and can seriously stymie your soldering momentum if you run into a bad component or a faulty reflow.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Adafruit NeoPixel Digital RGB LED strips come to us in 4 or 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires as shown in the picture below. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .High accuracy MCU control is employed to synchronously detect 3 tool channels that can be used independently and synchronously without mutual interference.