276°
Posted 20 hours ago

FriendlyElec Nanopi R4S Mini Portable Travel Router OpenWRT with Dual-Gbps Ethernet Ports 4GB LPDDR4 Based in RK3399 Soc for IOT NAS Smart Home Gateway

£379.995£759.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

To disable the A/B feature, you can refer to the following to modify device/rockchip/rk3399/nanopc-t4/BoardConfig. For a reference point, my RPi4 does cake/piece_of_cake on an asymmetric 900000 kbit/s down/300000 kbit/s with no buffer bloat (waveform test). At this point I could start boring you with benchmarks and other numbers that under the bottom line telling nothing about real world application. No throttling was detected, and for instance, 7-zip scores (~5800) are roughly the same as for RockPi 4C with the Rockchip RK3399 clocked a 1. ports that can interface with external hard drives, 4G modules, USB HD cameras, USB WiFi modules etc.

the root user account is disabled by default, you may configure the root password through the 'sudo passwd root' command. You may need to prise it out gently from the USB ports side if the heatsink pad sticks the board to the case. I’ve tried first to leave it idle for 10 mins, then only test the WAN and then the bridged network (WAN+LAN 1Gbps). Model: Rockchip RK3399Number of Cores: 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53Frequency: C.

Especially the really low power (1,5-1,8W), while running the red net (via the RTL NIC) with 100Mbps.

I then configured a SAMBA share in LuCi and the command line, to transfer files from my laptop to the USB drive connected to NanoPi R4S. The Standard version doesn't have a MAC-address built-in EEPROM chip while the Enterprise version does. I then inserted the card into NanoPi R4S, connected Ethernet cables to the WAN and LAN ports, and powered it using MINIX NEO P2 USB-C power adapter. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . If your main network is IPv4, and NanoPi-R4S works in IPv6, the computer may not be able to connect to the Internet.So, now lets test the bridge network interface, which is actually the most interesting benchmark for this device as it shows it’s capabilities in the real-case scenario. The effects will ripple through time and space and improve the support of a lot of other devices now and in the future. Tips: most of the existing embedded ARM boards such as RPi 3B have MAC addresses that are generated via software utilities. There’s quite the market for ARM-powered single board computers with Rockchip, Amlogic, Allwinner, Broadcom, and other system-on-chip (SoC) brands at its heart.

It is (apparently) a good hardware platform for developing IoT applications, NAS applications, smart home gateways etc. To remove the ISP box, I need WAN side VLAN tagged packets, kind of DHCP specific config, 6to4 tunnelling for ipv4 traffic, etc, the r4s will handle that on wan side.Just as a side note: The performance on the second network interface might not be as good as it could be yet. If I can help in any way just let me know but PLEASE don't ask me how to program in C/PASCAL/NODE/etc. As you can see the processor usage is ~60% which the double compared to the Nanopi-R4S, but again the docker daemon uses ~30% of the CPU. If you've never tried to bring up a circuit board before with embedded Linux, this is exactly what it is like. Note that I also tried the official firmware FriendlyWRT, and some other custom WRTs version and all are able to get past 900+ Mbps.

After the compilation is successfully completed, the OTA update related packages are located in the directory: rockdev/otapackage/ ,Please do not delete this directory. OK More information about cookies rockchip rk3399 6core armv8 microsd 1024ram 4096ram 2port gigabitethernet 0wnic 2nic 2usb usb2. As you can see from the above benchmarks the Nanopi-R2S has trouble to reach the maximum performance of the network and this seems to be an issue with the internal USB-to-GbE of the board. I had to add relevant device tree binaries to the MSDOSBOOT partition and everything works well on the RockPro64 now.I’ve actually seen significant difference by moving the IRQs and the RPS to CPU4 for eth0 and CPU5 for eth, which are the 1. We recommend using a machine with 32GB of RAM and a large-capacity, high-speed SSD, and we do not recommend using virtual machines. I recently bought an R5S hoping to use it as a gigabit router with some future proofing due to the 2. That’s just to say it might be better to wait a little longer until Armbian images are released, or until FriendlyELEC fixes some of the shortcomings. aarch64 /aarch64-cortexa53-linux-gnu /sysroot --enable-languages=c, c++ --enable-fix-cortex-a53-843419 --with-arch=armv8-a+crypto+crc --with-cpu=cortex-a53 --with-pkgversion=ctng-1.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment