Cromapol Acrylic Waterproofing Coating Grey - 5 KG

Product Information

Suitable for use on flat and pitched roofs, flashing, fibre cement, guttering, slate, asphalt, lead, metal and roofing felt Once used, this waterproof coating is not adversely impacted by extreme temperatures. This is due to its ability to reflect UV energy. This ensures the Cromapol coating does not warp or discolour. Application is simple, ensure all surfaces are free from loose debris, and gaps that are larger than 3mm are covered using Scrim Tape and Cromapol prior to full application. It can then be applied by a roller or a brush. Due to the nature of the product brushes and rollers cannot be cleaned and should be disposed of. Coverage

Application: Flat and Pitched Roofs, Roof Lights, Flashings, Fibre Cement Sheeting, Gutters, Slate, Asphalt, Lead, Metal and Roofing Felt Amazingly, Cromapol will waterproof instantly, even in damp or wet conditions, will not wash off while curing and will withstand ponding and usually covers in only one coat which normally needs no primer. These application instructions are for guidance only and do not constitute any warranty of product performance. When applied in a single coat, Cromapol typically provides a coverage rate of around 1-2 litres per square metre (10-20 square feet).

Whilst every endeavour has been made to ensure that this information is reliable, we cannot accept any liability for loss, injury or damage which may result from its use.

Cromapol is an all-weather waterproofing solution, which is crafted from a unique acrylic formula. Unlike many other roof coatings Cromapol does not need a primer and only requires a single coat, therefore reducing the amount of labour required.Storage Conditions: Store away from children, indoors between 5 degrees c and 20 degrees c, away from flames & sources of ignition We recommend storing it under covers and between temperatures of 5°C and 20°C to maintain its quality.

Cromapol requires no primer on most surfaces with the exception of asphalt or bitumen for which a coat of Cromar CP Primer available separately) is recommended. Please note: Whilst Cromapol can be walked on, it is not suitable for anything more than occasional, light foot traffic. It is important to note that this product is classified as a potentially hazardous item and should always be stored safely, in a cool, dry and secure place, out of reach of children. Gap or expansion joints greater than 3mm must be covered using Glass-Fibre scrim and Cromapol. This must be carried out prior to full coating. Yes, acrylic roof coatings are generally considered good as they provide effective waterproofing, UV protection, and durability. They can extend the lifespan of roofs, reduce energy costs, and offer resistance to weathering. However, the quality and performance may vary depending on the product and application.

Solseal Delivery Schedule

Cromar strongly recommends inspecting the surface and carrying out adhesion tests to any existing coating or substrate prior to the application. Cromapol is suitable forgeneral waterproofing and sealing of roofs, pitched surfaces & for sealing flashings Comprehensive application instructions relating to specific surfaces and uses may be obtained on application to Cromar Building Products.

Ensure your roof is sealed up, watertight and resistant to leaks with our range of Cromapol acrylic roof coating here at Build & Plumb. Just one coat of Cromapol roof paint sealant promises immediate protection from leaks by creating a reinforced, fully flexible and impervious membrane. Cromapol acrylic roof coating is designed to hold up in all weathers and is unaffected by temperatures, ensuring your building is kept dry and leak-free throughout all seasons. Cromapol Roof Paint Sealant Applying Cromapol will ensure pooling water does not penetrate the roof. Many people also add a layer of Cromapol over lead flashing and near guttering to provide an additional layer or protection. Buy Cromapol Acrylic Roof Coating With both 20kg and 5kg tubs available, this waterproofing roof coating is perfect for virtually any roof size. With over 10% off at the time of this article being published, you can also make mega savings on your flat roof repair. With November upon us, the poor weather is setting in. It’s during the final months of the year that small leaks can begin to become apparent. This is particularly the case on flat roofs, where the severely hot summer may have caused deformities to occur. Cromapol Acrylic Waterproofing Roof Coating is known for its durability and longevity. The exact duration of its effectiveness can vary depending on factors such as the application, environmental conditions, and maintenance. Typically, Cromapol has a lifespan of 10 years or more.Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent, and is designed to prevent the incress of water. Due to the high level of fibres in Cromapol, this coating will bridge small gaps and fissures and requires only one coat to provide instant waterproofing. Under optimal storage conditions in sealed original containers, our product maintains its quality for a period of 12 months. Unlike other acrylic roof coatings, only one layer of Cromapol is required. This means you can apply the product yourself in minimal time. You can use a paint brush to apply Cromapol, but due to the fibres and nature of the resin, you will have to dispose of the paintbrush after you’ve finished. You also do not need to prime the area beforehand. Variety of Uses