Mag-Float Glass Aquarium Cleaner, Small

Product Information

It also has a little brush attachment that’s great for cleaning the corners near the silicone seal.

There are two different sponge attachments, a flat one and one that’s shaped to fit into the tank corners. The flat sponge is good on soft algae but it couldn’t make a dent in the green spot algae. But, the scraper blade is really great for cleaning along the surface of the substrate. You have to be careful and slow as you clean along the substrate line anyway, so it’s no big deal to slow down and take the time to use the scraper blade on the Fl!pper in this area. We have a 14-day return policy, which means you have 14 days after receiving your item to request a return. There are a lot of different algae scrapers out there on the market, so we broke it into two main categories:I’ve gotta say, the design behind this thing is pretty darn cool. So, one side of the inside scrubber is a rough scratchy pad for doing large areas.

If no errors occur, the floating point value with the magnitude of mag and the sign of sgn is returned. I always mag float the concrete before steel troweling. Mag floating the surface will continue to let the surface "breath" and continue to let moisture escape out the surface. If you steel trowel the concrete too early, you could potentially damage the surface by trapping moisture or air under it - this causes blisters and scaling eventually. All animals that we import can take 3 to 4 days to arrive with us from abroad so a 24 to 48 hour travel time with us shouldnt be an issue If num1 or num2 has type long double, then std :: copysign (num1, num2 ) has the same effect as std :: copysign ( static_cast < long double > (num1 ),This little scraper is kind of simple, but it’s also really effective. It utilizes super thin razor blades that do a great job scraping off both soft or tough algae. It also comes with a small brush attachment that’s good for getting into tight corners.

The handle comes in four pieces. You can use all four and make it 26 inches (66 centimeters) long or leave some of the sections out and make it as short as 9 inches (23 centimeters) long.The scraper blade side was much better at removing the green spot. I did have to go really slow, but the blade was able to get it up. I actually found that I greatly preferred the plastic scraping blade over the metal one on the green spot algae. Some scrapers or scrubber pads are suitable for glass tanks, others are made for acrylic tanks, and some have options to be used for both.